Functions that must be remembered
136
Chapter 5
11. Functions that must be remembered
11-1. To check the number of total stitches up to now (Total Stitch Counter)
11-1-1. Screen
[a] The number of total stitches embroidered up to now. When resetting the value, select "0" and
press SET key.
[b] Time from start after data set to the present (The screen shows an example of 50 minutes and
8 seconds.)
Counting continues even during sleep mode and turning OFF the power.
Embroidery time will be reset in the following conditions.
When the current embroidery is finished and the machine starts next
When data is set
11-1-2. How to operate
The following is an example that the total stitch counter is checked.
(1) To open screen
C screen will be displayed. Check the total stitch counter.
2 Total Stitch Counter / Design Timer
C
8752195
0:50:8
[st]
[H:M:S]
[a]
[b]
&
2 Total Stitch Counter / Design Timer
To Next Page
Loading...