Contents
Chapter 4 How to perform embroidery
1. To turn ON the power........................................................................................................... 34
1-1. Power switch ............................................................................................................... 34
1-2. To turn ON the power.................................................................................................. 36
2. Thread passing, fabric setting .............................................................................................. 37
2-1. Thread passing............................................................................................................ 37
2-2. To set fabric to embroidery frame ............................................................................... 40
3. Registration of a design into the machine memory .............................................................. 41
3-1. To use USB memory (Data Input USB)....................................................................... 41
3-2. To use personal computer (Data Input LAN)............................................................... 45
4. Decision of an embroidery design and the color change sequence..................................... 50
4-1. To decide embroidery design (Data Setting)............................................................... 50
4-2. To decide color change sequence (Needle Bar Selection) ......................................... 53
4-3. To change color automatically / to start operation automatically
(Auto Color Change "AC" / Auto Start "AS")................................................................ 55
5. Decision of the design start position..................................................................................... 57
5-1. To check design size and setting contents of design (Check of design).................... 57
5-2. To lower the needle bar to adjust the frame position (Needle bar operation) ............. 58
5-3. To move frame to the design start position (Manual frame travel) .............................. 59
5-4. To check if design fits in embroidery space (Trace).................................................... 62
6. Check items before embroidering ........................................................................................ 64
6-1. Maximum speed (Maximum RPM) .............................................................................. 64
6-2. Embroidery head ......................................................................................................... 66
7. Embroidery starts ................................................................................................................. 68
7-1. Start and stop .............................................................................................................. 68
7-2. Frame Back (to return the frame) / Frame Forward (to advance the frame) ............... 69
7-3. Handling of thread breakage ....................................................................................... 73
7-4. Completion of embroidery ........................................................................................... 75
To Next Page
Loading...