IV-78
HYDRAULIC UNITSPILOT VALVE
Joint: 47.1 ±2.9 N·m
8. Install the disc (2), the adjust nut (1) and the
lock nut.
• Tighten the adjust nut to the point where all 4
push rods are uniformly making contact.
• During tightening, the disc should not be
moved.
Adjust Nut: 68.6 ±4.9 N·m
Lock Nut: 49 ±3.4 N·m
9. Apply grease to the contact surfaces of the joint
To Next Page
Loading...
