IV-68
HYDRAULIC UNITSCONTROL VALVE (SUB)
Solenoid Valve A
1. Loosen the nut and remove the solenoid coil
(1).
Nut: 29.4 ±2.94 N·m
2. Remove the shaft (2) from the body.
• Take care not to miss the push rod.
Shaft: 37.3 ±3.92 N·m
3. Remove the O-ring from the shaft (2).
4. Remove the spool (3) and sleeve (4) from the
body.
• To remove the sleeve, turn the body upside
down and lightly tap it.
Control Valve
1. Loosen the plug (5) from the body.
Plug: 98.1 ±9.81 N·m
2. Remove the O-ring from the plug (5).
3. Remove the spring (6) and washer (7).
4. Loosen the plug (8) from the body.
Plug: 75.5 ±7.85 N·m
5. Remove the O-ring from the plug (8).
6. Remove the spool (9) from the body.
Relief Valve
1. Loosen the plug (10) from the body.
Plug: 75.5 ±7.85 N·m
2. Remove the O-ring from the plug (10).
3. Remove the spring (11).
T6D901
To Next Page
Loading...
