Takeuchi TL150 - Page 253

IV-107
HYDRAULIC UNITSCYLINDERS
TABLE OF SPECIAL TOOLS
Installation Jig (A)
MATERIAL: SS41
Installation Jig (B)
MATERIAL: SS41
Unit: mm
Installation Jig (A) Installation Jig (B)
ABCDE FABCDE F
Arm 49.0 45.0 28.0 22.0 15.0 60.0 54.0 45.0 40.0 5.0 15.0 65.0
Bucket 43.0 40.0 28.0 34.0 15.0 55.0 54.0 45.0 40.0 5.0 15.0 65.0
Sliding Jig (C)
MATERIAL: STKM13C
Fitting Jig (D)
MATERIAL: NYLON
Unit: mm
Sliding Jig (C) Fitting Jig (D)
ABCDEABC
Arm 20.0 75.5 73.0 55.0 35.0 80.0 78.0 70.0
Bucket 20.0 75.5 73.0 55.0 35.0 80.0 78.0 70.0
