I-5
GENERAL
Always clean the machine
• Clean the machine before performing mainte-
nance.
• Cover electrical parts when washing the machine.
Water on electrical parts could cause short-cir-
cuits or malfunctions.
Do not use water or steam to wash the battery,
sensors, connectors or the operator·s seat area.
Stop the engine before performing main-
tenance
• Avoid lubrication or mechanical adjustments with
the machine in motion or with the engine running
while stationary.
• If maintenance must be performed with the engine
running, always work as a 2-person team with
one person sitting in the operator·s seat while the
other works on the machine.
• When performing maintenance, be sure to
keep your body and clothing away from mov-
ing parts.
Stay clear of moving parts
• Stay clear of all rotating and moving parts. Wrap-
ping or entanglement may result in serious injury
or death.
• Keep hands, clothing and tools away from the
rotating fan and running fan belts.
Securely block the machine or any com-
ponent that may fall
• Before performing maintenance or repairs under
the machine, set all working equipment against
the ground or in the lowermost position.
• Securely block the tracks.
• If you must work beneath the raised machine or
equipment, always use wood blocks, jack-stands
or other rigid and stable supports. Never get un-
der the machine or working equipment if they
are not sufficiently supported. This procedure is
especially important when working on hydraulic
cylinders.
Securely block the working equipment
To prevent unexpected movement, securely block
the working equipment when repairing or replacing
the cutting edges or bucket teeth.
Secure the engine hood or cover when
opened
Be sure to secure the engine hood or cover when
opening it. Do not open the engine hood or cover on
slopes or in strong wind.
Place heavy objects in a stable position
When removing or installing the hoe attachment,
place it in a stable position so that it does not tip
over.
To Next Page
Loading...
Need help?
General
