RA_6360_6375_01 - EN
- Cables, wiring harness -
14.07 Cable, wiring harness guide
Cables on handlebar
right left
1 2 3 4 5 6 7 8
Briggs & Stratton
Quantum
650.0 T X X
650.0 V/VM X X X
650.0 VS X X X X
650.0 VE X X X X
655.0 V/VM X X X
655.0 G/GM
X X X
655.0 GS X X X X
Briggs & Stratton
Quantum Quick-
Start
650.0 VQ X X X
655.0 GQ X X X
Kawasaki
FJ 180V
650.0 TK X X X
650.0 KS X X X X
655.0 KS
X X X X
655.0 GK X X X X
Briggs & Stratton
DOV
650.0 OS X X X X
655.0 OS/ 655.1 VS X X X X
655.1 V/ VM X X X
655.1 G X X X
655.1 GS X X X X
1 Vario cable
2 Three-speed gearshift cable
3 Throttle cable
4 Blade clutch cable
5 Quick-Start cable
6 Wheel drive cable
7 Motorstop cable
8 Wiring harness
- Remove engine
(see section 12.05.01)
- Disconnect starter battery
(see section 13.01.01)
14.06 Replacing wiring
harness
14.06.01 Disconnecting wiring
harness
- Remove charging socket
(see section 02.12.01)
- Remove ignition lock
(see section 02.13.01)
- Install ignition lock
(see section 02.13.02)
- Install charging socket
(see section 02.12.02)
14.06.02 Connecting wiring
harness
- Connect starter battery
(see section 13.02.02)
- Install engine
(see section 12.05.02)
112