Viking MB 650 - Installing Detent Segment; Removing Height Adjustment Indicator; Replacing Height Adjustment Indicator

- Height adjustment -
07.05 Replacing height -
adjustment indicator
07.05.01 Removing height
adjustment indicator
- Remove translatory lever cover
(see section 05.07.01)
• Remove height adjustment
indicator 1.
1
07.05.02 Installing height -
adjustment indicator
- Install translatory lever cover
(see section 05.07.04)
• Attach height adjustment
indicator 1.
1
• Tighten nut 1 (4-6 Nm).
1
• Fit detent segment 1 and insert bolt
2 in bore A.
1
A
2
- Install detent segment tension
spring
(see section 07.02.02)
07.04.04 Installing detent
segment
78 RA_6360_6375_01 - EN