- Engine -
12. Engine
12.01 Deactivating
Quick-Start
12.02 Replacing engine cover
12.02.01 Removing engine
cover
- Detach the ignition cable from the
spark plug to prevent unintentional
starting.
• Turn safety key 1 to position “Run
Position” (1/4 turn towards tank
cap), in order to release Quick-
Start.
• Actuate and hold the motorstop
control bar 1 on the handlebar.
• Pull Quick-Start control bar 2 quickly
straight back towards the handlebar
(spring of Quick-Start device is
released).
• Turn safety key 1 to lock position
“Lock & Remove” (1/4 turn away
from tank cap) and remove from
engine.
Models with Briggs & Stratton
Quantum engines
• Remove screws 1, remove engine
cover 2.
Models with Briggs & Stratton
DOV engines
• Remove upper engine cover 1 from
lower engine cover 2.
• Remove screws 1 and remove lower
engine cover 2.
Note:
Quick-Start must be deactivated
for all repair operations (models
MB 650 VQ, MB 655 GQ).
98 RA_6360_6375_01 - EN
To Next Page
