Viking MB 650 - Dismantling Front Axle; Assembling Front Axle; Installing Front Axle

RA_6360_6375_01 - EN 36
- Chassis -
04.01.02 Dismantling front axle
Note:
Axle is not symmetrical. Ensure
correct position of the swivel plate
(left side) when attaching the
translatory lever.
• Remove screw 1.
1
• Remove bottom part 1 and upper
part 2 of carrying handle from
axle 3.
1
3
2
04.01.03 Assembling front axle 04.01.04 Installing front axle
• Fit bottom part 1 and upper part 2 of
carrying handle onto axle 3.
1
3
2
• Tighten screw 1 (1-2 Nm).
1
• Insert axle 1.
1
• Tighten screws 1 (5-7 Nm).
1
1
1
1
Note:
Set the cutting height adjustment to
the highest position (position 7).