Viking MB 650 - Replacing Centre Handlebar Section; Removing Left Centre Handlebar Section; Installing Left Centre Handlebar Section

RA_6360_6375_01 - EN 16
- Handlebar -
02.09 Replacing centre
handlebar section
02.09.01 Removing left centre
handlebar section
02.09.02 Installing left centre
handlebar section
• Detach motorstop control bar 1 /
blade stop control bar 1 on left of
centre handlebar section.
1
• Remove left centre handlebar
section 1.
1
• Tighten nut 1 (8-10 Nm).
1
• Attach motorstop control bar 1 /
blade stop control bar 1 on left in
bore A on centre handlebar section.
1
A
1
1
• Remove nut 1.
• Attach left centre handlebar
section 1.
- Remove outside left housing half
(see section 02.03.04)
- Remove cable anti-kink protection
(see section 02.07.01)
- Install cable anti-kink protection
(see section 02.07.02)
- Attach outside left housing half
(see section 02.04.04)