RA_6360_6375_01 - EN
- Blade clutch -
• Insert bolt 1 in clutch flange 2 .
• Attach brake band 1 to brake band
eye A and then push onto the bolt
(clutch flange) together with bushing
2 and washer 3.
11.08.02 Installing brake band
lever
- Install blade mounting
(see section 11.01.04)
• Tighten nut 1 (4-6 Nm).
• Attach cable 1 to brake band lever 2
(bore A).
• Attach spring 1 to brake band lever
2 (bore A).
• Push bolt 1 out of clutch flange
(if necessary, use a plastic
hammer).
93
To Next Page
