Viking MB 650 - Installing Right Console; Removing Right Console

RA_6360_6375_01 - EN
- Console -
- Install right lower handlebar
(see section 02.10.04)
- Install strut
(see section 08.01.02)
- Install left / right cover
(see section 08.02.02)
08.03.04 Installing right console
• Insert bolts 1 and tighten nuts 3 with
washer 2 (12-18 Nm).
2
3
3
1
1
• Push rod 1 through bore A of
console 2.
2
1
A
08.03.03 Removing right
console
- Remove right lower handlebar
(see section 02.10.03)
- Remove strut
(see section 08.01.01)
- Remove left / right cover
(see section 08.02.01)
• Remove nuts 1, washer 2 and
bolts 3.
• Remove right console 4.
2
1
3
1
3
4
- Install left lower handlebar
(see section 02.10.02)
- Install strut
(see section 08.01.02)
- Install left / right cover
(see section 08.02.02)
- Install detent segment
(see section 07.04.04)
81