Viking MB 650 - Replacing Handle Shell; Removing Handle Shell; Installing Handle Shell; Replacing Translatory Lever Cover

- Housing -
• Unclip handle shell 1 on inside of
flap 2 using a flat-bladed
screwdriver.
1
2
05.06.01 Removing handle shell
05.06 Replacing handle shell 05.07 Replacing translatory
lever cover
• Clip handle shell 1 in flap 2.
1
2
05.06.02 Installing handle shell
• Unclip translatory lever cover 1 from
housing on underside of appliance.
1
05.07.01 Removing translatory
lever cover
- Remove housing cover assembly
(see section 05.02.01)
60 RA_6360_6375_01 - EN