Viking MB 650 - Installing Locking Lever; Removing Vario;Three-Speed Lever; Replacing Vario;Three-Speed Lever

RA_6360_6375_01 - EN 30
- Control bars and levers -
- Attach inside right housing half
(see section 02.04.02)
03.06.02 Installing locking lever
• Fit detent lever 1 onto control bar 2.
12
1
1
A
• Insert motorstop / Quick-Start
control bar 1 into guide A on
handlebar on right.
• Engage locking lever 1 in detent
lever 2.
03.07 Replacing Vario /
three-speed lever
03.07.01 Removing Vario /
three-speed lever
• Detach handle 1 from lever 2.
- Remove inside right housing half
(see section 02.03.01)
1
2
• Detach cable 1 from bracket.
1
Illustrations show version with
blade clutch - (additional
throttle lever)