Viking MB 650 - Removing Right Lower Handlebar

RA_6360_6375_01 - EN19
- Handlebar -
- Attach housing cover assembly
(see section 05.02.04)
• Attach handlebar 1.
1
- Install cable anti-kink protection
(see section 02.07.02)
02.10.03 Removing right lower
handlebar
• Remove handlebar 1.
1
- Remove cable anti-kink protection
(see section 02.07.01)
- Remove housing cover assembly
(see section 05.02.01)
2
1
• Remove cap nut 1 and remove
washer 2.
1
2
3
• Remove nut 1.
• Remove collared washer 2 and
spring washer 3.
• Fit spring washer and collared
washer onto bolt.
Note:
Ensure correct installation position
of spring washer 1 (see Fig.).
1
2
1
2
• Tighten nut 1 (12-18 Nm).
1