Viking MB 650 - Installing Throttle Lever

RA_6360_6375_01 - EN 34
- Control bars and levers -
03.09.02 Installing throttle lever
• Attach cable 1 in bore A at throttle
lever and in bracket 2.
MB 650.0 TK
- Attach inside right housing half
(see section 02.04.02)
1
A
2
• Insert throttle lever 1 into housing
half and clip in place.
1
• Fit handle 1.
1
• Detach cable 1 from bracket 2 and
from bore A on throttle lever.
1
A
2
Models with Vario / three-speed
gearbox
• Insert spring washers 1 (2x) (ensure
opposing position).
1
1
1
1
Models with Vario / three-speed
gearbox
- Install Vario / three-speed lever
(see section 03.07.02)