Viking MB 650 - Removing; Dismantling Inside Left Housing Half; Assembling Inside Left Housing Half; Dismantling Outside Left Housing Half; Assembling Outside Left Housing Half

RA_6360_6375_01 - EN13
- Handlebar -
02.05.03 Removing /
dismantling inside left
housing half
MB 650.0 VE
- Remove charging socket
(see section 02.12.01)
MB 650.0 VE
- Remove ignition lock
(see section 02.13.01)
- Remove inside left housing half
(see section 02.03.03)
02.05.05 Dismantling outside
left housing half
• Remove screw 1.
• Remove wheel drive cable adjusting
element 2 from outside left housing
half.
- Remove outside left housing half
(see section 02.03.04)
- Attach outside left housing half
(see section 02.04.04)
02.05.06 Assembling outside
left housing half
• Insert wheel drive cable adjusting
element 1.
• Tighten screw 2 (1-2 Nm).
02.05.04 Assembling inside left
housing half
- Attach inside left housing half
(see section 02.04.03)
MB 650.0 VE
- Install ignition lock
(see section 02.13.02)
MB 650.0 VE
- Install charging socket
(see section 02.12.02)
1
2
2
1
02.05.07 Dismantling outside
right housing half
- Remove outside right housing half
(see section 02.03.02)
02.05.08 Attaching outside right
housing half
- Attach outside right housing half
(see section 02.04.01)