Viking MB 650 - Replacing Brake Band; Removing Brake Band; Installing Brake Band; Replacing Clutch Flange

- Blade clutch -
• Remove bolt 1.
• Attach brake band 1.
• Detach blade clutch cable 1 from
clutch flange 3 and then remove
from brake band lever 2.
• Tighten screw 1 (4-6 Nm).
• Remove brake band 1.
11.09 Replacing brake band
11.09.01 Removing brake band
11.09.02 Installing brake band
- Remove blade mounting
(see section 11.01.01)
- Install blade mounting
(see section 11.01.04)
- Remove brake band lever
(see section 11.08.01)
- Install brake band lever
(see section 11.08.02)
11.10 Replacing clutch flange
11.10.01 Removing clutch
flange
- Remove clutch drum
(see section 11.07.01)
94 RA_6360_6375_01 - EN