Viking MB 650 - Control Bars and Levers; Replacing Wheel Drive Control Bar; Replacing Motorstop Control Bar

RA_6360_6375_01 - EN 24
- Control bars and levers -
03.01 Replacing wheel drive
control bar
03.01.01 Removing wheel drive
control bar
- Remove inside left housing half
(see section 02.03.03)
03.02 Replacing motorstop
control bar
03.02.01 Removing motorstop
control bar
- Remove inside right housing half
(see section 02.03.01)
• Remove cable support 1.
- Remove inside left housing half
(see section 02.03.03)
03.01.02 Installing wheel drive
control bar
- Attach inside left housing half
(see section 02.04.04)
03. Control bars and levers
1
• Detach motorstop cable 1 from
control bar 2.
1
2
• Press motorstop control bar 1
together at both sides and detach
from handlebar.
1