RA_6360_6375_01 - EN39
• Remove shim ring 1 (right side).
• Remove shim ring 1 (left side).
• Push gearbox 1 to the left
(in direction of arrow).
• Remove freewheel wedge 2.
• Remove freewheel wedge 1 on right
side of shaft 2 through bore A.
- Chassis -
• Remove retaining ring 1 (left / right).
• Remove washer 2 and pinion 3 from
shaft 4 (left / right).
• Remove axle 1 (with gearbox) from
housing.
04.02.02 Dismantling rear axle
To Next Page
