Viking MB 650 - Page 38

RA_6360_6375_01 - EN 38
- Chassis -
• Detach translatory lever 1 from
axle 2 (swivel plate).
1
2
Models with single-speed /
Vario gearbox
- Remove single-speed /
Vario gearbox support
(see section 06.04.01)
Models with three-speed gearbox
- Remove three-speed gearbox
support
(see section 06.04.03)
- Detach V-belt at gearbox.
Models with three-speed gearbox
- Remove cable support
(see section 06.06.01)
Models with single-speed
gearbox
• Detach wheel drive cable 1 at
gearbox 2.
Models with Vario gearbox
• Detach wheel drive cable 1 and
speed control cable 2 at gearbox 3
(tip gearbox backwards for this
purpose).
Models with three-speed gearbox
• Detach three-speed cable 1 from
gearbox 2.
• Unclip axle brackets 1 (left / right).