Viking MB 650 - Installing Right Lower Handlebar

RA_6360_6375_01 - EN 20
- Handlebar -
• Tighten nut 1 (12-18 Nm).
1
• Fit washer 1 onto rod 2 and tighten
cap nut 3 (12-18 Nm).
3
1
2
• Attach handlebar 1.
1
- Install cable anti-kink protection
(see section 02.07.02)
2
1
• Pull out bolt 1 and remove right
lower handlebar 2.
02.10.04 Installing right lower
handlebar
• Fit left lower handlebar 1 and insert
bolt 2.
2
1
• Fit spring washer and collared
washer onto bolt.
Note:
Ensure correct installation position
of spring washer 1 (see Fig.).
2
1
1
2
- Attach housing cover assembly
(see section 05.02.04)