Viking MB 650 - Replacing Height Adjustment Handle; Removing Height Adjustment Handle

RA_6360_6375_01 - EN
- Housing -
• Fit washer 1, attach handlebar
height adjustment rotary handle 2.
2
1
MB 650.0 T/ V/ VE/ VM,
MB 655.0 V/ VM/ G/ GM,
MB 655.1 V/ VM/ G
• Attach motorstop cable 1 at engine.
1
1
• Remove screw 1.
1
• Detach 1 handle from housing.
1
• Tighten screws 1, 2 (5-6 Nm).
1
1
1
2
1
1
05.03 Replacing height
adjustment handle
05.03.01 Removing height
adjustment handle
- Remove housing cover assembly
(see section 05.02.01)
57