Viking MB 650 - Replacing Lower Handlebar; Removing Left Lower Handlebar; Installing Left Lower Handlebar

RA_6360_6375_01 - EN 18
- Handlebar -
• Attach motorstop control bar 1 /
blade stop control bar 1 on right in
bore (A) on centre handlebar
section.
Models with blade clutch /
with Quick-Start
- Install blade clutch lever /
without Quick-Start
(see section 03.04.04)
1
A
- Install starter cable guide
(see section 02.08.02)
- Attach outside right housing half
(see section 02.04.01)
02.10 Replacing lower
handlebar
02.10.01 Removing left lower
handlebar
• Remove handlebar 1.
1
1
2
3
• Remove nut 1.
• Remove collared washer 2 and
spring washer 3.
2
1
• Pull out bolt 1 and remove left lower
handlebar 2.
- Remove cable anti-kink protection
(see section 02.07.01)
- Remove housing cover assembly
(see section 05.02.01)
02.10.02 Installing left lower
handlebar
• Insert lower handlebar 1 in guide
and insert bolt 2.
1
2