Viking MB 650 - Replacing Flap; Removing Flap; Installing Flap

RA_6360_6375_01 - EN
- Housing -
• Insert screwdriver in area of spring
recess A and lever out flap 1.
1
A
• Engage flap 1 in recess A.
• Position screwdriver in area of spring recess B and press in direction of arrow.
• Simultaneously engage flap 1 in recess C.
A
C
1
B
05.05.01 Removing flap
05.05.04 Installing flap
- Remove housing cover assembly
(see section 05.02.01)
05.05.02 Dismantling flap
- Remove handle shell
(see section 05.06.01)
05.05.03 Assembling flap
- Install handle shell
(see section 05.06.02)
- Remove spring
(see section 05.04.01)
- Attach housing cover assembly
(see section 05.02.04)
- Install spring
(see section 05.04.02)
05.05 Replacing flap
59