Viking MB 650 - Installing Height Adjustment Handle; Replacing Spring; Removing Spring; Installing Spring

- Housing -
• Insert handle 1 in housing.
1
• Tighten screw 1 (1-2 Nm).
1
05.03.02 Installing height
adjustment handle
• Detach spring 1 from housing 2 and
from flap 3.
Note:
For easy removal of the spring,
the STIHL special service tool
5910 890 2800 can be used.
Note:
For easy installation of the spring,
the STIHL special service tool
5910 890 2800 can be used.
1
2
3
05.04.01 Removing spring
- Attach housing cover assembly
(see section 05.02.04)
- Remove housing cover assembly
(see section 05.02.01)
• Attach spring 1 in opening A of the
flap 2 and in rib B of the housing 3.
1
3
2
1
1
B
A
05.04.02 Installing spring
- Attach housing cover assembly
(see section 05.02.04)
05.04 Replacing spring
58 RA_6360_6375_01 - EN