WAGNER Titanus Micro-Sens User Manual

TITANUS MICRO·SENS
®
Installation Pipe System
06/13
151
cap of the air sampling pipe. If necessary, please heat the hose by hot
air gun.
NOTICE
The whole of aspiration reducing film sheet must be located over the open-
ing of pipe cap directly. The diameter of opening in the aspiration reducing
film sheet must not be changed.
To keep the glued surface of the film clean from dust and grease, please
avoid any contact.
WARNING
The air sampling hose cannot be monitored during the application of ceiling
ducts with up-streamed aspiration reduction within the T-pieces (pipe
caps).

WAGNER Titanus Micro-Sens Specifications

General

Brand	WAGNER
Model	Titanus Micro-Sens
Category	Smoke Alarm
Language	English