WAGNER Titanus Micro-Sens - 1 General Information and Safety; 1.1 Introduction to the Manual; 1.2 Safety Information and Symbols

TITANUS MICRO·SENS
®
General
06/13
13
General
Introduction
This manual is for installers of air sampling smoke detection systems, in par-
ticular for engineers, technicians, and fitters etc. who have technical knowl-
edge in the field of smoke detection technology but who are possibly working
with this device for the first time.
For damage and faults resulting from the non-observance of this manual
WAGNER Group GmbH, called WAGNER in the following, does not assume
liability.
This manual refers to the air sampling smoke detection systems TITANUS
MICRO·SENS
®
. These systems may only be used for early and very early
smoke detection.
Safety information
The following symbols identify parts of the text in this manual which re-quire
special attention so that damage can be avoided and so that operations can
run smoothly.
WARNING
This symbol warns against actions,
which might cause damage if it is ignored.
NOTICE
This symbol warns against actions,
which could cause operational breakdowns if it is ignored.
TIP
Operational improvements can be achieved if this symbol is observed.
1
1.1
1.2