WAGNER Titanus Micro-Sens User Manual

TITANUS MICRO·SENS
®
Design
06/13
61
Design
General
The following describes the project planning of the air sampling smoke de-
tection system to EN 54-20 or ISO 7240-20. The basic conditions are de-
scribed in Chapter 5.1. The basic conditions are described in Chapter 5.1.
The project planning is to be conducted in accordance with Chapter 5.2.
The limiting project planning instructions in accordance with Chapter 5.2 ap-
ply to special applications in addition to Chapter 5.3 These should be taken
into consideration at the beginning of project planning for special projects.
Project planning options according to EN 54-20 or ISO 7240-20:
There are various technical solutions to be selected from, depending on the
project planning criteria. The chapters for the solutions are listed in the fol-
lowing tables.
Project planning
criterion
Technical solution Basic Principles Limitations
General area
monitoring
Standard project planning Chapter 5.2 _
Recognition of a failure
at an individual aperture
Project planning for indi-
vidual aperture monitoring
Chapter 5.2 Chapter 5.3.1
Device protection /
cabinet monitoring
Simplified pipe project
planning
Chapter 5.2 Chapter 5.3.2
Ventilation conduits Project planning for forced
air flow
Chapter 5.2 Chapter 5.3.5
5
5.1

WAGNER Titanus Micro-Sens Specifications

General

Brand	WAGNER
Model	Titanus Micro-Sens
Category	Smoke Alarm
Language	English