WAGNER Titanus Micro-Sens User Manual

Technical Description
TITANUS MICRO·SENS
®
42
06/13
Pipe system
Overview
A
A
A
A
DF-Clip
non-return valve
TITANUS
®
End cap
air sampling pipe
noise suppressor
pipe cap
Connections
A
pipe system
special filter
45°- elbow
marking tape for AF
pipe with PG16
internal thread
air flow reducer
aspiration reducing
film sheet
steam trap
air filter
ceiling feed
through
air
sampling
hose-
reducer coupling
90° elbow
90° arc
sleeve
T- p i e c e
test adapter
air sampling
hose
Figure 21: Components of the pipe system for smoke detection systems
The accessories shown in the figure are to be chosen for the particular indi-
vidual case and can be used in combination.
In areas in which there is expected to be an increased occurrence of dust
particles or ice formation, blowing through of the aspiration pipe system and
aspiration apertures may be necessary. Figures each show the components
of a manual and an automatic blowing-out system. Depending on the fre-
3.3
3.3.1
Free blow device

WAGNER Titanus Micro-Sens Specifications

General

Brand	WAGNER
Model	Titanus Micro-Sens
Category	Smoke Alarm
Language	English