WAGNER Titanus Micro-Sens - Setting Reaction Sensitivity

TITANUS MICRO·SENS
®
Installation
06/13
133
Figure 87: Height, Air Pressure and Fan Voltage settings
In the diagnostic software, the current TITANUS
MICRO·SENS
®
figures are
displayed on the Settings screen.
The figures can be changed by pressing the Settings button.
Setting reaction sensitivity
The sensitivity (fire alarm) of the detection unit can be set using the TITA-
NUS
MICRO·SENS
®
diagnostic tool.
Sensitivity Sensitivity
Standard
Settings
stages
Detection Unit
DM-TM-10 0.1 - 2 %/m 0.1 %/m 0.1 %/m
Detection Unit
DM-TM-50 0.5 - 2 %/m 0.5 %/m 0.1 %/m
6.12.1.1