Installation
TITANUS
MICRO·SENS
®
120
06/13
TITANUS
MICRO·SENS
®
in the network
WARNING
Do not touch the components on the main board without an anti-static set
(with the exception of the DIL switch and button)!
WARNING
Only carry out assembly and connection work when the device is discon-
nected from the power supply.
Installing the network module in the TITANUS
MICRO·SENS
®
WARNING
Housing for TITANUS
®
accessories is required for installing the network
card.
WARNING
Mount the TITANUS
®
accessories housing directly next to the air sampling
smoke detection system.
6.8
6.8.1
To Next Page
Loading...
