Service Manual FB 7100 Programming
4 - 70 January, 2005
4.3.8.2 Set payment type
This option is used to define the payment type, ie the type of coin
mechanism in the vending machine.
4.3.8.3 Set max credit
This option is used to set an amount for the maximum allowed credit.
4.3.8.4 Set max change
This option is used to set an amount for the maximum allowed change.
v Sel Esc^
Single/Multi vend
* Set payment type
Set max credit
Sub menu Description
Payment type (0-4) Setting of the coin mechanism type available in
the machine.
Options:
0 = OFF (no coin mechanism)
1 = MDB
2 = EXEC (Executive)
3 = BDV
4 = VAL (coin validator)
v Sel Esc^
Set payment type
* Set max credit
Set max change
Sub menu Description
Set max credit Definition of the maximum amount which can be
inserted in one vend when the system is set to
multi-vend.
v Sel Esc^
Set max credit
* Set max change
Obligation to buy
Sub menu Description
Set max change Definition of the maximum amount which the coin
mechanism can return after a vend when the
system is set to multi-vend.
If the coin credit remaining following a multi-vend
is greater than the programmed max change
value, no change will be paid out. The full credit
will be retained until further purchases are made
reducing the credit below the maximum change
level.
To Next Page
Loading...
