Service Manual FB 7100 Programming
January, 2005 4- 71
4.3.8.5 Obligation to buy
This option is used to set the Obligation to buy option on or off.
4.3.8.6 Coin inhibit
This option is used to set the Coin inhibit status for the individual coin
values in the coin unit.
4.3.8.7 Low change inhibit
This option is used to set the Low change inhibit status for individual
coins.
v Sel Esc^
Set max change
* Obligation to buy
Coin inhibit
Sub menu Description
Obligation to buy If this option is set to “On”, the customers have to
make at least one vend before the coin
mechanism will return the change.
The purpose of the function is to prevent that the
vending machine be used as a change giver.
v Sel Esc^
Obligation to buy
* Coin inhibit
Low change inhibit
Sub menu Description
Coin inhibit (1-16) The coin inhibit option makes it possible to set the
coin unit to reject coins that are normally accepted
in the coin unit.
“Coin 1“ is the lowest-value coin. Status for up to
16 coin values can be defined.
v Sel Esc^
Coin inhibit
* Low change inhibit
Audit unit install.
Sub menu Description
Low change inhibit
(1-16)
The Low change inhibit option makes it possible to
set the coin unit to reject coins that are normally
accepted when the stock of coins in the coin tubes
run low.
“Coin 1“ is the lowest-value coin. Status for up to
16 coin values can be defined.
To Next Page
Loading...
