Service Manual FB 7100 Programming
4 - 42 January, 2005
4.2.10.7 Machine info
The Machine info option is described in this table.
4.2.10.8 Energy saving
To save energy, the machine can be set to lower the water temperature over
a certain time period at fixed intervals. Up to seven energy saving periods
can be set in the machine.
The following table describes the options of the Energy saving function.
Se also explanation in the paragraph Setting energy saving periods, on
page 4-43.
v Sel Esc^
Set key discount
* Machine info
Energy saving
Sub menu Description
Machine code A machine code can be entered to give the
machine a unique number for identification when
retrieving data electronically.
The number will be written on printed reports (see
4.2.6.10 ).
Operator code A number identifying the operator can be entered
for identification when retrieving data
electronically.
The number will be written on printed reports (see
4.2.6.10).
Show install date Shows the date of installation of the machine as
recorded under “Set install date”, see below.
The number will be written on printed reports (see
4.2.6.10).
Set install date This option makes it possible to record the date of
installation. Pressing ‘OK’ will enter today’s date in
the system.
v Sel Esc^
Machine info
* Energy saving
Set counters ON/Off
Sub menu Description
Save energy On/Off If Save energy is set to “Off”, no energy saving
periods will be active.
If Save energy is set to “On”, the energy saving
function will be active in the defined periods.
To Next Page
Loading...
