Xerox 4112 User Manual

Problem Solving
Xerox 4112/4127 Copier/Printer 12-35
User Guide
027-726 m Cause: The job status is unclear during an application interface.
Remedy: Check whether an application linked operates correctly.
When it is operating, check the log. When it is not operating, check
the network environments.
027-727 m Cause: A parameter is illegal during an application interface.
Remedy: Try to process the job flow.
027-737 mmCause: An error occurred while reading data from the job template
pool server.
Remedy: Check to see whether you have privileges for the directory
storing the job template.
027-739 mmCause: Unable to find the specified job template server.
Remedy: Check the path name for the job template server.
027-740 mmCause: Unable to login to job template server.
Remedy: Check the login user name and password.
027-741 mmCause: Unable to connect to job template server.
Remedy: Have the network administrator check the network and
server environments.
027-742 mmCause: Unable to store job template due to insufficient hard disk
space.
Remedy: Remove unnecessary data from the hard disk to increase
free disk space.
027-743 mmCause: The specified job template server is incorrect.
Remedy: Check the settings for the job template server.
027-744 mmCause: There is a problem in the domain name of the job template
server.
Remedy: Make sure that the DNS server connection and the
domain name are registered to the DNS server.
027-745 mmCause: The address of the DNS server is not registered on the
machine.
Remedy: Either register the address of the DNS server on the
machine or set the address of the job template server by an IP
address.
027-746 mmCause: The specified job template pool server protocol settings are
incorrect.
Remedy: Set up the correct port.
027-750 m Cause: Attempted to command a print job to a scanned document.
Remedy: Scanned document cannot be printed. Configure the job
flow correctly.
027-751 m Cause: When following the job flow, an error occurred.
Remedy: Check the settings for the job flow.
027-752 m Cause: In a job flow, a job start was specified before a required item
was input.
Remedy: Configure a default to input the required item in the job
flow or change the job flow to have the required item link to the
folder.
027-753 m Cause: The necessary port for the job flow is either not enabled or is
unavailable.
Remedy: Have your System Administrator check the port status.
Error Code
Category
Cause and Remedy
C P S
M
O

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English