February 2013
6-104
ColorQube® 9303 Family
GP 39
General Procedures/Information
GP 39 How to Enable HTTP
Purpose
To enable the hyper text transfer protocol (HTTP) networking protocol.
Procedure
Perform the following:
1. Enter Customer Administration Tools, GP 5.
2. Press the Machine Status button.
3. Select the Tools tab.
4. Select Network Settings.
5. Select Advanced Settings.
6. Select Continue.
7. Select HTTP Settings.
8. Select Enable.
9. Select Save.
10. Select Close.
11. Log out of Customer Administration Tools.
To Next Page
Loading...
