February 2013
6-281
ColorQube® 9303 Family
dC608, dC609
General Procedures/Information
dC608 Document Feeder Registration
Purpose
This feature checks the registration of the document feeder and corrects any misalignments.
The process runs automatically and does not require any user intervention other than inserting
three blank sheets in the document feeder.
Procedure
1. Enter service mode, GP 1.
2. Select the Adjustments tab.
3. Select dC608 Document Feeder Registration.
The screen displays the current registration values
4. Insert 3 blank A4 (or 8.5 x 11 inch) white sheets, any orientation, into the document
feeder.
5. Ensure the document feeder guides are correctly adjusted.
6. Select Start.
The document feeder feeds the documents.
The screen displays the values for before and after registration.
7. Select Close to exit the routine.
8. Select Call Closeout to exit service mode
dC609 Document Glass Registration
Purpose
This feature checks the registration of the document glass and corrects any misalignments.
The process runs automatically and does not require any user intervention other than keeping
the document feeder open during the operation.
Procedure
1. Enter service mode, GP 1.
2. Select the Adjustments tab.
3. Select dC609 Document Glass Registration
The screen displays the current registration values.
4. Open the document feeder and remove any paper from the document glass.
NOTE: The document feeder should remain open until this procedure is complete.
5. Select Start to run the routine.
The screen displays the values for before and after registration.
6. Select Close to exit the routine.
7. Select Call Closeout to exit service mode
To Next Page
Loading...
Need help?
General
