Xerox ColorQube 9301 - Page 592

February 2013
2-568
ColorQube® 9303 Family
OF 4a
Status Indicator RAPs
93-887-00 Incompatible black ink
stick detected. Notify
your system administra
-
tor.
Black metered ink stick
expected, DMO was detected
Check that the
machine is on the cor
-
rect contract - Print a
configuration page,
General set up, service
plan. Check the ink
loaded is as per the
customers contract GP
34. Check the ink load
sensors dC330 - 93-
026 to 93-041
93-888-00 Incompatible black ink
stick detected. Notify
your system administra
-
tor.
Black DMO ink stick expected,
metered was detected
Check that the
machine is on the cor
-
rect contract - Print a
configuration page,
General set up, service
plan. Check the ink
loaded is as per the
customers contract GP
34. Check the ink load
sensors dC330 - 93-
026 to 93-041
93-889-00 Close the ink loader
main cover
In a recovery sequence or cold
power start, when ink stick
door is open
Close the ink loader
main cover. Copying
and printing are not
available. Other
machine services are
unaffected
93-893-00 Please wait... Auto-
mated print engine
maintenance in
progress
This is raised while the IME is
attempting to clear a potentially
jammed black ink stick
No service action
required. Print and
copy services are tem
-
porarily disabled
93-894-00 Please wait... Auto-
mated print engine
maintenance in
progress
This is raised while the IME is
attempting to clear a potentially
jammed magenta ink stick
No service action
required. Print and
copy services are tem
-
porarily disabled
93-895-00 Please wait... Auto-
mated print engine
maintenance in
progress
This is raised while the IME is
attempting to clear a potentially
jammed cyan ink stick
No service action
required. Print and
copy services are tem
-
porarily disabled
93-896-00 Please wait... Auto-
mated print engine
maintenance in
progress
This is raised while the IME is
attempting to clear a potentially
jammed yellow ink stick
No service action
required. Print and
copy services are tem
-
porarily disabled
Table 16 Chain 91 to 94 Status codes
Status
Code UI Message Reason for Message Reference / Action
93-905-00 - It is raised when the IME rec-
ognizes that the cyan ink stick
is consumed. This means it
went past the ink low flag (it's
past the point it can be
removed from the system and
will be consumed). This is criti
-
cal for supplies replenishment
and is used to estimate the rate
at which ink sticks are being
used
No service action
required. All services
are available
93-906-00 - It is raised when the IME rec-
ognizes that the magenta ink
stick is consumed. This means
it went past the ink low flag (it's
past the point it can be
removed from the system and
will be consumed). This is criti
-
cal for supplies replenishment
and is used to estimate the rate
at which ink sticks are being
used
No service action
required. All services
are available
93-907-00 - It is raised when the IME rec-
ognizes that the yellow ink stick
is consumed. This means it
went past the ink low flag (it's
past the point it can be
removed from the system and
will be consumed). This is criti
-
cal for supplies replenishment
and is used to estimate the rate
at which ink sticks are being
used
No service action
required. All services
are available
93-908-00 - It is raised when the IME rec-
ognizes that the black ink stick
is consumed. This means it
went past the ink low flag (it's
past the point it can be
removed from the system and
will be consumed). This is criti
-
cal for supplies replenishment
and is used to estimate the rate
at which ink sticks are being
used
No service action
required. All services
are available
Table 16 Chain 91 to 94 Status codes
Status
Code UI Message Reason for Message Reference / Action