Yamaha F40B - Installing the Shift Rod, Oil Seal Housing, and Drive Shaft; Installing the Propeller Shaft Housing Assembly

LOWR
Lower unit
6-17 67C3K11
Installing the shift rod, oil seal
housing, and drive shaft
1. Install the forward gear assembly 1 into
the lower case.
2. Install the drive shaft 2, and then install
the pinion 3 and pinion nut 4 to the
shaft.
NOTE:
When installing the pinion 3, lift up the drive
shaft 2 slightly and align the gear and shaft
splines.
3. Tighten the pinion nut 4 to the specified
torque.
4. Install the shift rod 8, washer 9, shift
rod housing 0, washer A, and oil seal
housing B.
Installing the propeller shaft housing
assembly
1. Install the propeller shaft assembly 1
into the lower case.
2. Install the washer 2 and propeller shaft
housing assembly 3 into the lower case,
and then tighten the bolts 4 to the speci-
fied torque.
S67C6048
G
G
3
2
4
1
S67C6098
5
7
6
6
Drive shaft holder 3 5: 90890-06517
Pinion nut holder 6: 90890-06505
Socket adapter 1 7: 90890-06506
T
R
.
.
Pinion nut 4:
74 N·m (7.4 kgf·m, 54.6 ft·lb)
S67C6100
BOW
BOW
B
8
0
9
A
A
A
A
S67C6049
G
1