CHK
ADJ
Periodic check and adjustment
3-15 67C3K11
Checking the propeller
1. Check the propeller blades and splines.
Replace the propeller if cracked, dam-
aged, or worn.
NOTE:
When replacing the propeller, see “Propeller
selection” (1-13) and select a propeller of the
same size as originally installed.
General
Checking the anode
1. Check the anodes. Clean the anodes if
there are scales, grease, or oil.
È D model
CAUTION:
Do not oil, grease, or paint the anodes,
otherwise they will be ineffective.
NOTE:
• Replace the anodes if excessively eroded.
In addition, check the ground lead.
• If it is necessary to disassemble the out-
board motor to check an anode, refer to the
applicable disassembly procedure in this
manual.
S67C3048
S67C3058
S67C3049
S67C3050
È
S67C3059
S67C3051
To Next Page
Loading...
