GEN
INFO
General information
1-1 67C3K11
How to use this manual
Manual format
The format of this manual has been designed to make service procedures clear and easy to under-
stand. Use the information below as a guide for effective and quality service.
• Parts are shown and detailed in an exploded diagram and are listed in the component list (see 1
in the figure below for an example page).
• The component list consists of part names and quantities, as well as bolt and screw dimensions
(see 2 in the figure below).
• Symbols are used to indicate important aspects of a procedure, such as the grade of lubricant and
lubrication point (see 3 in the figure below).
• Tightening torque specifications are provided in the exploded diagrams (see 4 in the figure below
for an example), and in the related detailed instructions. Some torque specifications are listed in
stages as torque figures or angles in degrees.
• Separate procedures and illustrations are used to explain the details of removal, checking, and
installation where necessary (see 5 in the figure below for an example page).
NOTE:
For troubleshooting procedures, see Chapter 9, “Troubleshooting.”
5
2
3
4
1
To Next Page
Loading...
