Yamaha F40B - Page 226

BRKT
Bracket unit
7-45 67C3K11
5. Install the filters A, main valve seal B,
and valve pin C.
6. Install the gear pump assembly D, and
then tighten the bolts E to the specified
torque.
7. Install the filter F, absorber valve pins
G, balls H, and gear pump housing I,
and then tighten the bolts J to the speci-
fied torque.
NOTE:
When installing the gear pump housing I,
apply grease to the O-rings and balls H to
prevent them from falling out.
T
R
.
.
Gear pump bolt E:
4 N·m (0.4 kgf·m, 3.0 ft·lb)
S67C7086
E
D
E
A
A
C
B
C
B
S67C7140
LT
271
J
I
H
G
J
J
H
G
F
T
R
.
.
Gear pump housing bolt J:
9 N·m (0.9 kgf·m, 6.6 ft·lb)