SPEC
Specification
2-5 67C3K11
Ignition control system CDI (micro computer)
Advanced type Micro computer
Ignition timing
at 850 r/min Degree ATDC 5 ± 2
Maximum generator output V, A 12, 15.0
Spark plug DPR6EA-9 (NGK)
Cooling system Water
Exhaust system Propeller boss
Lubrication system Wet sump
Fuel and oil
Fuel type Regular unleaded gasoline
Engine oil type 4-stroke motor oil
Engine oil grade
(*1)
API SE, SF, SG, SH, SJ, or SL
SAE 5W-30, 10W-30, or 10W-40
Engine oil quantity
(without oil filter
replacement)
L (US qt,
Imp qt)
2.0 (2.11, 1.76)
(with oil filter replacement) L (US qt,
Imp qt)
2.2 (2.33, 1.94)
Gear oil type Hypoid gear oil
Gear oil grade
(*2)
API GL-4
SAE 90
Gear oil quantity cm
3
(US oz,
Imp oz)
430 (14.54, 15.17)
Bracket unit
Trim angle
(at 12° boat transom)
Degree –4 to 20
Tilt-up angle Degree 66
Steering angle Degree 40 + 40
PTT system
Fluid type ATF Dexron II
Drive unit
Gear shift positions F-N-R
Gear ratio 2.00 (26/13)
Reduction gear type Spiral bevel gear
Clutch type Dog clutch
Propeller shaft type Spline
Propeller direction (rear view) Clockwise
Propeller mark G
(*1)
If the recommended engine oil grades are not available, use engine oil with an API classification of SH, SJ,
or SL and an SAE classification of 15W-40, 20W-40, or 20W-50.
(*2)
Meeting both API and SAE requirements
Item Unit
Model
F30AEHT F30AET F40BWHT F40BET
To Next Page
Loading...
