Yealink T21PE2 - Page 321

Call Features
315
Values
1-On, incoming calls to the account X are forwarded to the destination number (configured by the para-
meter “account.X.busy_fwd.target”) when the callee is busy.
Default 0
Web UI Features->Forward&DND->Forward->AccountX->Busy Forward->On/Off
Phone UI Menu->Features->Call Forward->AccountX->Busy Forward->Busy Forward
Parameter
account.X.busy_fwd.target
[1]
<MAC>.cfg
Description
It configures the destination number of the busy forward.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1 (Cus-
tom). It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->Busy Forward->Target
Phone UI Menu->Features->Call Forward->AccountX->Busy Forward->Forward to
Parameter
account.X.busy_fwd.on_code
[1]
<MAC>.cfg
Description
It configures the busy forward on code to activate the server-side busy forward feature.
The IP phone will send the busy forward on code and the pre-configured destination number (configured
by the parameter “account.X.busy_fwd.target”) to the server when you activate the busy forward feature
on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1 (Cus-
tom). It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->Busy Forward->On Code
Phone UI Menu->Features->Call Forward->AccountX->Busy Forward->On Code
Parameter
account.X.busy_fwd.off_code
[1]
<MAC>.cfg
Description
It configures the busy forward off code to deactivate the server-side busy forward feature.
The IP phone will send the busy forward off code to the server when you deactivate the busy forward fea-
ture on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1 (Cus-
tom). It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->Busy Forward->Off Code
Phone UI Menu->Features->Call Forward->AccountX->Busy Forward->Off Code
Parameter
account.X.timeout_fwd.enable
[1]
<MAC>.cfg