Yealink T21PE2 - Page 498

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
492
Parameter bw.virtual_user.1.xsi.host <MAC>.cfg
Description
It configures the IP address of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled). It is not applicable to
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
Values
IP address or domain name
Default Blank
Parameter bw.virtual_user.1.xsi.server_type <MAC>.cfg
Description
It configures the access protocol of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled). It is not applicable to
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
Values
HTTP or HTTPS
Default Blank
Parameter bw.virtual_user.1.xsi.port <MAC>.cfg
Description
It configures the port of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled). It is not applicable to
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
Values
Integer from 1 to 65535
Default 80
Parameter
account.X.reason_code.Y
[1][2]
<MAC>.cfg
Description
It configures the unavailable/away code which must match one of the codes configured on BroadWork-
s/Star2Star platform.
Permitted
Values
Integer from 1 to 2147483647
Default Blank
Parameter
account.X.reason_code_name.Y
[1][2]
<MAC>.cfg
Description
It configures the unavailable/away reason which must match one of the reasons configured on
BroadWorks/Star2Star platform.
Permitted
Values
String within 99 characters
Default Blank
Parameter
account.X.bw_disp_code.Y
[1][2]
<MAC>.cfg
Description It configures the disposition code which must match one of the codes configured on BroadWorks.
Permitted
Values
Integer from 1 to 2147483647
Default Blank
Parameter
account.X.bw_disp_code_name.Y
[1][2]
<MAC>.cfg