Phone Customization
101
Default 1000
Web UI Settings->Time&Date->Update Interval (15~86400s)
Parameter local_time.time_zone <y0000000000xx>.cfg
Description It configures the time zone.
Permitted
Values
-12 to +14
For available time zones, refer to Time Zone.
Default +8
Web UI Settings->Time&Date->Time Zone
Phone UI Settings->Basic Settings->Time&Date->General->Type (SNTP Settings) ->Time Zone
Parameter local_time.time_zone_name <y0000000000xx>.cfg
Description
It configures the time zone name.
Note: It works only if “local_time.summer_time” is set to 2 (Automatic) and the parameter “local_time.-
time_zone” should be configured in advance.
Permitted
Values
String within 32 characters
The available time zone names depend on the time zone configured by the parameter “local_time.time_
zone”. For available time zone names, refer to Time Zone.
Default China(Beijing)
Web UI Settings->Time&Date->Location
Phone UI Settings->Basic Settings->Time&Date->General->Type (SNTP Settings) ->Location
DST Settings
You can set DST for the desired area as required. By default, the DST is set to Automatic, so it can be adjusted auto-
matically from the current time zone configuration.
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the DST is set to Automatic, the
phone obtains the DST configuration from the AutoDST file.
You can customize the AutoDST file if required. The AutoDST file allows you to add or modify time zone and DST set-
tings for your area each year.
Topics
Auto DST File Attributes
Customizing Auto DST File
Auto DST File Attributes
The following table lists the description of each attribute in the template file:
Attributes Type Values Description
szTime required [+/-][X]:[Y], X=0~14, Y=0~59 Time Zone
szZone required
String (if the content is more than one city, it is the best to keep
their daylight saving time the same)
Time Zone name
iType optional 0/1 DST time type
To Next Page
Loading...
Need help?
General
