Yealink T5 Series Administrator's Guide

Troubleshooting Methods
439
You can specify syslog details such as IP address or host name, server type, facility, and the severity level of events you
want to log. You can also choose to prepend the phone's MAC address to log messages.
Topics
Syslog Logging Configuration
Viewing the Syslog Messages on Your Syslog Server
Syslog Logging Configuration
The following table lists the parameters you can use to configure syslog logging.
Parameter static.syslog.enable <y0000000000xx>.cfg
Description It enables or disables the phone to upload log messages to the syslog server in real time.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Configuration->Syslog->Enable Syslog
Parameter static.syslog.server <y0000000000xx>.cfg
Description
It configures the IP address or domain name of the syslog server when exporting log to the syslog server.
Example:
static.syslog.server = 192.168.1.100
Permitted
Values
IP address or domain name
Default Blank
Web UI Settings->Configuration->Syslog->Syslog Server
Parameter static.syslog.server_port <y0000000000xx>.cfg
Description
It configures the port of the syslog server.
Example:
static.syslog.port = 515
Permitted
Values
Integer from 1 to 65535
Default 514
Web UI Settings->Configuration->Syslog->Syslog Server->Port
Parameter static.syslog.transport_type <y0000000000xx>.cfg
Description
It configures the transport protocol that the IP phone uses when uploading log messages to the syslog
server.
Permitted
Values
0-UDP
1-TCP
2-TLS
Default 0

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English