Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
266
Permitted
Values
Integer within 6 digits
Default Blank
Web UI Features->Audio->Redial Tone
Parameter
account.X.dial_tone
[1]
<MAC>.cfg
Description
It configures the dial tone for the phone.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Default (depend on the country tone by “voice.tone.country”)
1-440/250,0/250
2-1000/250,0/250
Default 0
Parameter features.voice_mail_tone_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to play a warning tone when it receives a new voice mail.
Note: It works only if “account.X.display_mwi.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->General Information->Voice Mail Tone
Parameter features.send_key_tone <y0000000000xx>.cfg
Description
It enables or disables the phone to play a key tone when a user presses a send key.
Note: It works only if “features.key_tone” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Audio->Send Tone
Parameter features.key_tone <y0000000000xx>.cfg
Description It enables or disables the phone to play a key tone when a user presses any key on your phone keypad.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Audio->Key Tone
Phone UI Settings->Basic Settings->Sound->Key Tone->Key Tone
Ring Tones
Ring tones are used to play for incoming calls. You can select a built-in ring tone or a custom ring tone for the phone
system or specific line registration. To set the custom ring tones, you need to upload the custom ring tones to the IP
phone in advance.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English